ECCO 55: 3D sensors for higher speed applications

For higher speed applications, where small size, low weight and exceptional value are important, the ECCO 55 Series offers the ideal solution. These 3D Sensors deliver the highest price/performance in the smallest compact housing, making them idea for any manufacturing process.

Properties & Benefits

  • High Scan Rate – For fast production lines
  • Exeptional Value – Best price/performance
  • Smallest Lightweight Housing – Easy to fit anywhere
SmartRay™
ECCO 55.020
Typical field of view (near | mid | far ) 1 22 | 24 | 26 mm
Measurement range 1 20 mm
Stand-off distance 70 mm
Typical vertical resolution (Z) 1 3.25 – 4.75 µm
Typical lateral resolution (Y) 1 35 – 40 µm
Z-Linearity 2, 5 0.01% (0.1 µm/mm)
Z-Repeatability 4, 5 3.8 µm
Weight Approx. 180 g
Partnumber 3.002.095
Maximum points / 3D-profile 640
Typical scan rate 3 Approx. from 400 Hz up to 6 kHz
Typical 3D point rate 3 Approx. from 0.3 up to 3.9 million points/sec
Interface Fast Ethernet ( 100 Mbit/ sec)
Inputs 4 x Inputs, 5 – 24 VDC
Quadrature Encoder, AB-Channel, RS-422 standard
Outputs 2 x Outputs, 24 VDC
Trigger START Trigger support on Input 1
DATA Trigger support on Quadrature Encoder Input (Max. DATA trigger rate: 100 kHz)
DATA Trigger support on Input 2, 3 (Max. DATA trigger rate: 10 kHz)
Input voltage | Power 24 VDC, ± 15 % ripple | 4.5 W
Laser wavelength 660 nm
Laser class (standard | optional) 2M | –
Maximum ambient light 10,000 lx
EMC test as per EN 61 000-6-2, EN 61 000-6-4
Vibration/ Shock test as per EN 60 086-2-6, -27, -29, -64
Electrical safety as per EN 61 010-1-3
Protection class III, as per EN 61 040-3
Enclosure rating IP65
Air humidity Maximum 90%, non-condensing
Temperature (operation | storage) 0 – 40° C | -20 – 70° C
Compatible accessories Power-I/O cable: 6.310.0XX
Ethernet cable: 6.302.0XX
Encoder cable: 6.307.0XX

 

(1) Typical values can vary up to 5% due to optical tolerances
(2) Z-Linearity calculated as a variation of “bias” (reference value vs. measured value) over the measurement range. The %slope of a best-fit (regression) line from a plot of bias over measurement range represents Z-Linearity
(3) Scan rate & point rate are dependent on the configured field of view, measurement range and exposure time. The typical scan/point rate has been estimated with an exposure time of 1 µsec
(4) Experimentally asessed by scanning a measurement target moving over a conveyor belt 50 times. Measurement perfomed by averaging height values within the Z-Map image. No post-processing filters applied
(5) Measurements performed on a SmartRay standard artifact which is an aluminium flat matt surface painted matte white

Product Datasheets
Product Datasheets Chinese
Dimensional Drawings
3d model pdf
About our Technologie